Shenzhen Kanghongjin Electronics Co., Ltd
Specialized in SMT consumables Since 2002s
Add to Cart
| DESCRIPTION |
| M15 series splice tape is used for jointing carrier tapes in the SMT process. It is made of tapes and |
| polyester film and release paper, and the tape is with superior adhesion. |
| Part (reel) | Dimensions (pc) | Package | |
| M1508 (8mm) | 2.5/4/4.5 x 34mm | 500pcs/box | |
| M1512 (12mm) | 2.5/8/8.5 x 34mm | 500pcs/box | |
| M1516 (16mm) | 2.5/12.5/12 x 34mm | 500pcs/box | |
| M1524 (24mm) | 2.5/20/19.5 x 34mm | 250pcs/box |
| APPLICATION | ADVANTAGES |
| 1. Strips of PET tape used to join | 1. Increase Pick and Place machine output |
| 8mm SMT carrier tapes | by 5% - 30% |
| 2. Possible to use without the splice tool | 2. Reduce reel change downtime |
| and clip | 3. Decrease machine abrasion by reducing |
| 4. 3 splice tapes design | the need to reload the feeder |
| 4. 8 Placement holes for easy alignment |
INSTRUCTIONS
| 1. Use the cutting tool (MTL20/MTL30/MTL40) to accurately cut the carrier tapes. |
| 2. Remove the split liner of the splice tape to reveal the adhesive side. |
| 3. Align the cut carrier tapes (cover tape down) with the splice tape placement holes. |
| 4. Place both joining carrier tapes onto the first strip of the splice tape. |
| 5. Fold over the second strip to the underside of the carrier tape and press firmly. |
| 6. Remove and discard the clear plastic cover to complete the splice. |
|
| ceo@szsmt. com |